#Xyzprinting 3d scanner pro how to
#Xyzprinting 3d scanner pro pro
#Xyzprinting 3d scanner pro Pc
#Xyzprinting 3d scanner pro free

Our jack o’lantern test object lost much of its upper lip, and in another print, a jack o’lantern held by a Baby Yoda was mangled, although the Yoda itself turned out fine. I noticed it had some trouble printing overhangs.

#Xyzprinting 3d scanner pro pro

Print quality was a mixed bag-some objects turned out well, but the da Vinci 1.0 Pro had problems with others. When you have adjusted all three, the printer will recheck the calibration. There are three knobs or screws-one in front of the print bed, and one to each side-for adjusting the bed’s height, and you are instructed onscreen how far to turn each knob, and in which direction.

If the print bed is properly aligned, the words 'Perfect Level' appear onscreen, and you are ready to go. Next to the extruder nozzle is a height sensor the extruder assembly navigates to each of the build plate’s four corners and descends until the sensor touches a small metal plate. When I had pulled the tape off, I became concerned that I had misaligned the print bed, so I used the LCD’s controls to launch the da Vinci 1.0 Pro’s calibration routine. Fortunately, the printer comes with three tape squares, and when you have run through them, a wide roll of blue painter’s tape or masking tape should work fine as a substitute.

#Xyzprinting 3d scanner pro free

However, the heated print bed dried the glue, causing the object to adhere too firmly to the tape-to remove the print, I had to remove the tape square and then tear it free of the object, damaging the tape. It was only after I covered the print bed’s tape with glue from a glue stick (not included) that the print stayed put. The Polaroid PlaySmart 3D Printer has a tiny print bed (4.7 by 4.7 by 4.7 inches), but it is heated.Īs it turned out, even with the heated print bed, covered with an included tape square, one of the printer’s test objects, named Demo-a rectangular plaque with the words “3D Printer” appearing in relief-pulled off of the build plate the first two times I tried to print it. 1.0 Pro’s bed, which measures 6.9 by 6.9 by 6.9 inches, the Flashforge Finder’s bed (5.5 by 5.5 by 5.5 inches), or the Monoprice Cadet 3D Printer’s bed (a mere 4.1 by 3.9 by 3.9 inches), all of which are unheated. This is larger than the XYZprinting da Vinci Jr. For non-XYZprinting filaments, you can adjust the desired extruder, print-bed, and unloading temperatures by hand using the LCD.Īs befitting its jumbo size, the da Vinci 1.0 Pro has a large build volume, measuring 7.9 by 7.9 by 7.9 inches (HWD), and has a heated aluminum, non-removable print bed. When the molten filament comes out the nozzle, you press OK and you’re done.įor third-party filaments, you will need to use an external spool holder, which can be bought or constructed-it can even be 3D-printed. Then you press the Load command on the LCD, and the printer feeds the filament into the extruder. A chip reader identifies the filament type and characteristics. It was easy to load the cartridge of ABS filament that came with my da Vinci 1.0 Pro test unit-once the cartridge is in place, you press a lever and insert the free end of the filament into an opening that leads to the filament guide tube. You will want at least one other person to help you move it into place. It measures 20 by 18.4 by 22 inches (HWD), weighs 50.7 pounds, and arrives in an enormous box. Unlike many of the sub-$500 3D printers we have reviewed, the XYZprinting da Vinci 1.0 Pro is a bruiser. We struggled with a frequently onerous print-bed leveling process, inconsistent print quality, and getting objects printed with ABS filament to remain adhered to the print bed during the printing process. These premium features, however, are offset by some hurdles we encountered in our testing. These include a large build area the ability to go beyond PLA filament and print with ABS, HIPS, and PETG plastics support for both XYZprinting-branded and third-party filaments, and both Wi-Fi and USB connectivity.

#Xyzprinting 3d scanner pro how to

How to Set Up Two-Factor AuthenticationĪlthough its $499.95 price tag puts it just within our budget 3D printer category, the XYZprinting da Vinci 1.0 Pro has several features that make it more akin to higher-priced, intermediate-level 3D printers.

#Xyzprinting 3d scanner pro Pc

How to Record the Screen on Your Windows PC or Mac.How to Convert YouTube Videos to MP3 Files.How to Save Money on Your Cell Phone Bill.How to Free Up Space on Your iPhone or iPad.How to Block Robotexts and Spam Messages.